The article, “USB Not Recognized Kcolo Alternative Ways” is hoped to help you with USB not recognized problems while trying to flash or connect your phone to PC. This problem can be very frustrating at times making it almost impossible for you to flash a phone or even connect it to a PC to exchange files as it refuses to install drivers on your system.
This problem is multifaceted, thus, you will need to find out the possible areas its coming from by properly troubleshooting with your experience and vital information you can put together. Using this USB not recognized kcolo alternative ways as shown in the diagram could be of help if well implemented provided the solution is kcolo, colo or kolo related. Notwithstanding, we will be considering other solutions aside the one in the diagram just to be sure all “birds are shot in the head”! Below are Possible causes of the USB not recognized problem.
Possible Causes and Solutions of USB Not Recognized Ways
- Interrupted flashing process
- PC error codes
- Short circuit or internal component parts
Interrupted Flashing Process: USB Not Recognized Ways
If you do not want to get freaked out, make sure you do not interrupt an ongoing flashing process as this is identified to be one amongst other possible causes that necessitates the phone USB not recognized kcolo ways alternative just to make sure the problem is solved.
Possible Solution
To solve the problem applying the USB not recognized kcolo alternative ways as show in our featured diagram, look for the common between the volume up and the volume down and connect it to ground: the common might be negative/negative or positive/positive meaning you have to go with one or the other then reconnect to continue your flashing process. when this is done, the phone should be detected again. Disconnect the common after a successful flash before coupling the phone so your phone doesn’t automatically go in to recovery mode or so. Remember that this alternative is only necessary if you are working on a phone that doesn’t have the kcolo, colo or kolo test point labelled.
PC Error Codes
At times, the problem may arise as a result of some PC error codes. When you run so many software that are at logger heads with each other, chances are that they might clash and therefore alter healthy system software or application functions. Some times it could be as a result of outdated system drivers that needs to be updated online . You might also consider restarting your PC, but if that doesn’t work, you might want to check if your phone’s USB driver has been properly install, you might also want to make sure your phone debugging option is checked. To do this, go to setting from your phone, go to about, look for built number and tap on it seven times until you see the statement “you are now a developer”, head to developer option and turn on USB debugging and then reconnect your phone and see if it works!
Short Circuit or Internal Components
When you have applied the USB not recognized kcolo ways and done the PC error codes checks and phone troubleshooting to no avail, you might want to further check if the problem is as a result of faulty internal working components like charging port. If you want to find out more, read about Phone USB Charging Problem Solution Here
Was this article helpful? Do like and share to let others know what you found out here or leave a comment about how you feel on this. Goodluck with your devices.
